Model # THMSVL60AVB THMSVL60AVW USE AND CARE GUIDE 60” VANITY Customer Service: 1-866-942-5362 English, French and Spanish Monday - Friday, 8:30 a.m. - 4:30 p.m. PST (Toll-free in U.S. and Canada only) E-mail: parts@whalenfurniture.com www.whalenfurniture.com Date: 2020-12-25 Rev.
Table of Contents Tools required .............................................................................. 4 Hardware Included ....................................................................... 4 Package Contents ........................................................................ 5 Assembly ....................................................................... 6 Care and Cleaning ...................................................... 10 Maintenance & Consumer Responsibilities .............
Warranty LIMITED LIFETIME WARRANTY This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, the manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled incorrectly, misused, abused by overloading, altered in any way or damaged due to accident.
Pre-Assembly PLANNING ASSEMBLY Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not assemble this product and contact the Customer Service Team at 1-866-942-5362. TOOLS REQUIRED Phillips screwdriver Drill Bit Silicone compound Stud finder HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS C A B Part A B C Description Vanity Top Vanity Base Backsplash Quantity 1 1 1 5
Assembly 1 Removing Packaging Material □ Remove stone top and the packaging material under the stone top. A B 2 Stone Top Assembly □ □ apply a thin bead of silicone compound (not included) to the top of the vanity base ( B ). Align the back of the vanity base ( B ) and put the stone top ( A ) on the vanity base ( B ).
Assembly 3 Adjustable Level □ 4 In case of uneven floors, floor levelers are provided at the bottom of the vanity. If necessary, adjust floor levelers by hand to correct tilting and/or level doors. Water Supply Lines and Drain Assembly Guide □ □ □ Mark wall for vanity placement and note the location of the water supply lines and drain on the back panel of vanity. Move vanity (B) into proper place against the wall.
Assembly 5 Backsplash Assembly □ To mount the backsplash (C) to the wall, apply a thin bead of silicone compound (not included) to the unpolished back side and bottom of the backsplash (C). Position backsplash (C) as shown onto vanity top (A) and against the wall. Clean any excess silicone compound before allowing to dry. Silicone C A 6 Adjustable shelf □ Note: The adjustable shelves are pre-installed for shipping.
Assembly 7 Hinge Adjustment For Door Alignment □ □ □ □ If the doors preassembled to vanity base (B) require adjustment, follow the below options as needed: To adjust door up or down, loosen screws (a), adjust door and retighten screws. To adjust door left and right, turn screw (b) in or out. To adjust door in and out, loosen screw (c), adjust door and retighten screw.
Care and Cleaning □ □ □ □ □ Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. You can clean the vanity with a gentle, non-abrasive household cleaner. Make sure to dry the wood immediately with a soft cloth or towel. Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas, stroke in direction of wood grain. Rub excess colorant promptly with a soft cloth. Keep product away from direct sunlight as it may damage the finish.
Service Parts C Part D E F G H I J K L Description Quantity 1 C Backsplash D Drawer 4 E Drawer 2 F Left Door 2 G Right Door 2 H 2 I Adjustable Shelf Handle with Bolt 10 J Slow Close Hinge 8 K Drawer Slides 6 L Leveler 5 AA Touch-up Pen (not included for item # THMSVL60AVW) AA 1 11