Manual

Iron Sight
Adjustment For The
Fire Hawk
™
The Fire Hawk™ is equipped with the a standard rifle rear sight as shown
below which is adjustable for elevation by sliding the elevation blade up to
raise the point of impact and down to lower the shot’s impact. It is necessary
to loosen the elevation lock screw (by turning it counterclockwise, as viewed
from the rear) before sliding the sight blade to the desired setting. To adjust
the windage it is necessary to move the entire rear sight leaf left or right by us-
ing the slotted screw head on the right side of the rear sight (as viewed from
the receiver end of the sight). Move the rear sight blade in the direction you
want your shots to hit-- (Example; Turn the screw clockwise - thereby moving
the sight blade to the right, to move your shots to the right and counter-clock-
wise to move the shots to the left).
Mounting A Scope
On The Thompson/Center
Fire Hawk
™
Do not drill additional holes in the barrel as this could weaken its structure
and contribute to a rupture CAUSING INJURY AND/OR DEATH TO
THE SHOOTER OR BYST
ANDERS AND DAMAGE TO PROPER
TY
.
Folding 
Sight 
Leaf
Sliding 
Sight
Blade
Windage 
Adjustment 
Screw
Side View
Rear View
Elevation
Adjustment
Screw