Manual

53
Thompson/Center does not approve or recommend any type of custom
conversion or alteration other than those performed by the T/C Custom
Shop. Muzzleloading firearms subjected to alteration are not covered by
our factory warranty. Responsibility for alterations rests totally with the
gunsmith or individual performing the work. The consumer is warned
that if such work is done improperly or without proper judgement, the
firearm can malfunction or rupture CAUSING INJURY AND/OR
DEATH TO THE SHOOTER OR BYSTANDERS AND DAMAGE TO
PROPERTY.
Thompson/Center
Arms Company, Inc.
- Limited Warranty -
THOMPSON/CENTER ARMS provides a warranty for all factory
finished firearms for the LIFETIME OF THE ORIGINAL CONSUMER
PURCHASER
. Any firearm or part thereof returned, postage paid, to the fac-
tory at Farmington Road, Rochester, New Hampshire 03867, will be repaired
or replaced to our commercial standard free of charge, and returned to the
consumer purchaser postage prepaid. This warranty is established by return of
our authorized warranty card which should be done within (30) days of pur-
chase.
This warranty does not cover any damage caused by custom alter-
ation of the firearm other than those performed by the T/C Custom Shop!
Thompson/Center Arms reserves the right to refuse to repair or replace fire-
arms, or parts thereof, damaged by abuse or misuse.
This warranty does not cover “Kit models. While Thompson/Center
does guarantee the quality and workmanship of the parts contained in each kit
(and will replace any part which is proven, by our inspection, to be faulty in
either workmanship or material) we have no control over the final finishing
and assembly of these products. Therefore, no responsibility for either the con-
struction or use of kit models is implied or assumed. This warranty gives you
specific legal rights, and you may also have other rights which vary from State
to State. Address all correspondence and inquiries to:
THOMPSON/CENTER ARMS
P
.O. Box 5002,
Rochester, New Hampshire 03866
Parts Lists available upon request. Specify model, caliber and serial
number.