Instructions / Assembly

 Spray in sweeping motion from side to side extending past the end of the
surface area. Spray one thin coat over entire surface to be waterproofed -
DO NOT SATURATE.
 If applying a second coat in order to achieve more color and less grain,
allow first coat to dry 15 minutes.
 Oiliness and tackiness will result if over-applied, applied to wet or damp
surface, or if overnight temperature falls below 40°F within 48 hours of
application. Excessive oiliness may be removed by scrubbing wood with
concentrate degreaser.
DRYING
 Dries to touch in 60 minutes. Heavier applications may take longer to dry.
 Allow surface to dry fully for 24-48 hours before use.
CLEAN UP
 To prevent clogs, hold can upside down and spray until clear gas appears.
 To clean stain on dial, wear eye protection, and wipe off with mineral
spirits. DO NOT stick pin in dial opening.
 Clean overspray with mineral spirits following manufacturer’s instructions.
CAUTIONS
DANGER! EXTREMELY FLAMMABLE – VAPORS MAY CAUSE
FLASH FIRES! CONTENTS UNDER PRESSURE. VAPOR
HARMFUL. IRRITATES EYES, SKIN AND RESPIRATORY TRACT.
CONTAINS ALIPHATIC HYDROCARBONS, PROPANE, BUTANE.
DANGER! EXTREMELY FLAMMABLE. Keep away from heat, sparks,
DANGER: Rags, steel wool, other waste soaked with this
product, and sanding residue may spontaneously catch fire
if improperly discarded. Immediately place rags, steel wool,
other waste soaked with this product, and sanding residue
in a sealed, water-filled, metal container. Dispose of in
accordance with local fire regulations.