Data Sheet

ManualsBrandsThomsen ManualsCapacitorsThomsen 1 pc(s) MKP thin film capacitor Radial lead 2.2 µF 275 V AC 20 % 27.5 mm (L x W x H) 31 x 21 x 31 mm

MKP336 2 X2

www.vishay.com

Vishay BCcomponents

Not for New Designs - Alternative Device: MKP339 X2

Revision: 25-Jul-2019

Document Number: 28120

For technical questions, contact: rfi@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Interference Suppression Film Capacitors - Class X2

Radial MKP 310 V

- Standard Across the Line

FEATURES

• 10 mm to 27.5 mm lead pitch

• Supplied loose in box, taped on reel

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

APPLICATIONS

For standard across the line X2 applications

See also application note: www.vishay.com/doc?28153

Note

•For more detailed data and test requirements, contact: rfi@vishay.com

QUICK REFERENCE DATA

Capacitance range (E12 series) 0.001 µF to 2.2 µF (preferred values acc. to E6)

Capacitance tolerance ± 20 %; ± 10 %; ± 5 %

Climatic testing class according to IEC 60068-1 55/110/56/B

Rated AC voltage 310 V

; 50 Hz to 60 Hz

Permissible DC voltage 800 V

at 85 °C, 630 V

at 110 °C

Maximum application temperature C  470 nF: 110 °C (125 °C for less than 1000 h), C > 470 nF: 110 °C

Reference standards

IEC 60384-14 ed-4 (2013) and EN 60384-14

IEC 60065, pass. flamm. class B for volumes > 1750 mm

CQC GB/T6346.14-2015

UL 60384-14; CSA E384-14

Dielectric Polypropylene film

Electrodes Metallized film

Construction

Mono construction

Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0

Leads Tinned wire

Marking

C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation;

code for dielectric material; manufacturer location; manufacturer’s logo;

year and week; safety approvals

DIMENSIONS in millimeters

Ø d

P ± 0.4

Summary of content (15 pages)

PAGE 1
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents Interference Suppression Film Capacitors - Class X2 Radial MKP 310 VAC - Standard Across the Line FEATURES • 10 mm to 27.5 mm lead pitch • Supplied loose in box, taped on reel • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS For standard across the line X2 applications See also application note: www.vishay.
PAGE 2
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES MULTIPLIER (nF) CAPACITANCE 10.0 mm (numerically) 336 2 15.0 mm 0.1 X2 22.5 mm 1 3 10 4 100 5 27.5 mm Example: 104 = 10 x 10 = 100 nF BFC2 336 2222(*) 336 2X 2X 2 XX X XX X (*) old ordering code TYPE PACKAGING STANDARD DIMENSIONS C-TOL. Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm Loose in box Taped on reel Lead length 5.
PAGE 3
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA DESCRIPTION VALUE 310 V Rated AC voltage URAC 630 V Permissible DC voltage URDC Tangent of loss angle: at 1 kHz at 10 kHz C < 470 nF  10 x 10-4 470 nF  C 1 μF 20 x 10-4 C > 1 μF  30 x 10-4  20 x 10-4  70 x 10-4 - Rated voltage pulse slope (dU/dt)R at 435 VDC - Pitch = 10 mm 600 V/μs Pitch = 15 mm and 7.5 mm (bent back) 400 V/μs Pitch = 22.
PAGE 4
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE - PITCH 10 mm CATALOG NUMBER BFC2 336 ..... AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) REEL (500 mm) (1)(2) LOOSE IN BOX MASS (g) (3) SHORT LEADS lt = 3.5 mm + 1 mm/- 0.5 mm lt = 5.0 mm ± 1.0 mm LONG LEADS SPQ lt = 25.0 mm ± 2.0 mm H = 18.5 mm P0 = 12.7 mm SPQ SPQ PITCH = 10.0 mm ± 0.4 mm; dt = 0.6 mm ± 0.06 mm; C-TOL. = ± 10 % 0.
PAGE 5
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE - PITCH 15 mm CATALOG NUMBER BFC2 336 ..... AND PACKAGING REEL (500 mm) (1)(2) LOOSE IN BOX URAC (V) CAP. (μF) 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 310 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.
PAGE 6
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE - PITCH 22.5 mm CATALOG NUMBER BFC2 336 ..... AND PACKAGING REEL (500 mm) (1)(2) LOOSE IN BOX URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) MASS (g) (3) SHORT LEADS lt = 3.5 mm ± 0.3 mm lt = 5.0 mm ± 1.0 mm LONG LEADS SPQ lt = 25.0 mm ± 2.0 mm H = 18.5 mm P0 = 12.7 mm SPQ SPQ PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 0.15 0.22 6.0 x 15.
PAGE 7
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE - PITCH 27.5 mm CATALOG NUMBER BFC2 336 ..... AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (1) SHORT LEADS lt = 3.5 mm ± 0.3 mm lt = 5.0 mm ± 1.0 mm LONG LEADS SPQ lt = 25.0 mm ± 2.0 mm SPQ 150 PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 % 0.47 9.0 x 19.0 x 31.5 29055 29279 29095 20684 29149 26684 5.5 0.
PAGE 8
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents APPROVALS SAFETY APPROVALS X2 VOLTAGE VALUE FILE NUMBERS LINK 310 VAC 1 nF to 2.2 μF ENEC16/FI/19/10001 www.vishay.com/doc?28179 UL 60384-14 310 VAC 1 nF to 2.2 μF E354331 CSA-E 384-14 310 VAC 1 nF to 2.2 μF E354331 CQC GB/T6346.14-2015 310 VAC 1 nF to 2.2 μF CB test certificate 310 VAC 1 nF to 2.2 μF EN 60384-14 (ENEC) (= IEC 60384-14 ed-4 (2013)) www.vishay.
PAGE 9
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents CHARACTERISTICS Axis Title Axis Title 10000 4 10000 1000 1 nF Typical 2 4.7 nF 10 nF 100 47 nF 1000 -2 10 1st line 2nd line Maximum 2nd line Z (Ω) 0 1st line 2nd line 2nd line ΔC/C (%) 1000 100 nF 1 470 nF 100 -4 100 1000 nF 0.1 Minimum 10 -6 -50 0 50 0.
PAGE 10
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.
PAGE 11
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.
PAGE 12
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.9.2 Final measurements Visual examination No visible damage Capacitance |C/C|  5 % of the value measured initially Tangent of loss angle Increase of tan :  0.008 for: C  1 μF or  0.
PAGE 13
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB GROUP C2 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C|  5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan :  0.008 for: C  1 μF or  0.005 for: C > 1 μF Compared to values measured in 4.12.1.
PAGE 14
Not for New Designs - Alternative Device: MKP339 X2 MKP336 2 X2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.15.1 Initial measurements Capacitance Tangent of loss angle: For C  1 μF at 10 kHz For C > 1 μF at 1 kHz 4.15.3 Final measurements Capacitance |C/C|  10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan :  0.008 for: C  1 μF or  0.
PAGE 15
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.