User's Manual Part 1

Specifications - 22 -
®
Affinity LBD-200C-N1 Transmitter
Product Manual
RF Performance:
Modulation Standard DVB-T/DVB-H
Average Output Power 50, 100, 200, & 400 Watts
Output Frequency 1670-1675 MHz
Input Interface MPEG2 Dual ASI, 75 Ohms BNC female Connector
Output Connector 50, 100, and 200 watts – N female
400 watts – 7/16 DIN female
User interface 7/16DIN female (all cases)
Output Impedance 50 Ohms
Frequency Response
 r0.5 dB
Frequency Stability
r150 Hz 30 days (internal reference)
 r1 Hz (Optional External GPS)
Carrier to Noise (C/N)  55 dB
Hum and Noise  -60 dBc
Group Delay
 r200 ns
Out-of-band Emissions Compliant with FCC Document 47, Telecommunications: Part
27, Miscellaneous Wireless Communications Services:
Section 53, Emissions Limits. Subparts (i), (a) (4)
Harmonics
d -60 dBc
MER
t 30 dB
RF Output Regulation
dr .2 dB
Electrical Requirements:
Power Requirement (200 watts) Single Phase, 220 VAC +10% -15%;
Frequency 50/60 Hz
Consumption including ADAPT exciter
(does not include encoding / multiplexing
equipment, Starter PAK listed below for
reference)
200 watts 4350 VA
Heat loading including ADAPT exciter
(does not include encoding / multiplexing
equipment, Starter PAK listed below for
reference)
200 watts 3.42 kW
“ancillaries” consumption / heat loading 500 VA / 550 watts
Power Factor Correction Typical 0.95, minimum 0.9