User's Manual Part 1

Installation - 36 -
Affinity
®
LBD-200C-N1 Transmitter
Product Manual
7.1.4 Installation of Driver Plug-In Modules
The Driver Plug-in Modules slide into the sub-chassis on nylon slides and connect to the Driver
Backplane board via floating connectors. The driver section of the transmitter occupies the left
quadrant of rack space directly below the Sirius Exciter and adjacent to the Power Amplifier
Segments. Within the driver section, the Power Supply Module occupies the left slot, while the
Upconverter Module occupies the right slot. To install the driver plug-ins, slide the module into
its proper location until fully seated. There is a disconnect switch on the backplane board to
ensure that there is no arcing between connections before the segment is fully engaged. Once
the plug-in is in place, tighten the front panel thumbscrews to ensure that the plug-in remains
securely in place.
Driver Assembly
Power Supply Module Upconverter Module