User's Manual Part 1
Exciter Configuration Description - 52 -
®
Affinity LBD-200C-N1 Transmitter
Product Manual
10.1.1 Remote Operation
(Optional)
For SD configuration the remote operation is enabled by either the SNMP agent or the Web
server, both of which are embedded in the Sirius DVB-H RF Exciter.
10.1.2 SNMP Agent and Web Server
The objective of the SNMP agent is to ensure remote operation of the equipment by using the
SNMP protocol by means of the IP protocol supported by an Ethernet interface.
The SNMP agent is responsible for:
x Communication with the equipment by means of SNMP protocol
x Communication with the equipment by sending e-mail
x Implementation of FTP and TELNET protocols
The control of the equipment in this manner is only enabled when remote operation is selected.
The SNMP agent in both local and remote modes of operation always accepts monitoring
requests.
Access to the SNMP agent for either writing and/or reading is organized by means of user
profiles defining individual rights and conditions for access. The SNMP agent integrates SMTP
protocol allowing events to be sent via e-mail. Important events will automatically generate
“traps”. The links between events and traps are configurable by the operator.
A web server allows the equipment to be controlled from any standard browser by means of the
HTTP protocol. The control of the equipment in this manner is only enabled when remote
operation is selected. The web server, in both local and remote modes, always accepts
monitoring requests.
The web server provides:
x Static information such as leaflet and user manual of the equipment
x Dynamic information including displays of all status alarms and faults, and operating
parameters
x Operating or configuration control protected by means of user profiles and
passwords
x Access to equipment logbook
The following screen shots represent the main page and the page dedicated to the Sirius DVB-
H RF Exciter. These should provide an accurate representation of the capability of the
embedded web server.