User's Manual Part 2

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
MESSAGE FUNCTIONS DISPLAY/COMMENTS
Gives the window name.
Toggles between pres
vision and sound amplifier locatio
ent and absent or
n
Displays the amplifier location status into this
cabinet
Displays last selection
transmitter
ENT for analogue
PRES. / ABSENT for digital
VISION / SOUND. / ABS
transmitter
Shows the number of the particular
to which the data displayed in this
cabinet
window
refer.
2.1.2.4. "INSTALLATION ADAPT PARAMETERS" window
This window appears when the changeover switch SW1 on the PU interconnection card
(MODAP) or on the management system interconnection card (S
visible and that CPU board is reset.
It is called up by pressing i BINET"
window.
This window is used to cha n adaptation parameters stored in the CPU card.
exciter/C
IRIUS) is switched so that the dot is
the "INSTALL NEXT" control keys n the "CONFIGURATION CA
nge the configuratio
Note :
♦ DAP Vers
To set up a figuration of the modulator, the three corrections (ALE,
LUT and OLDC) shoul
MO ion only
new parameter con
d be set to the FIXED mode
. The control keys can
AINT Level 4" windows.
be defined in
the "MISCELLANEOUS" windows and "CONTROL M
♦ SIRIUS Versi
To set up a new parameter configuration of the mod
LUT) should be set to the FIXED mode
on only
ulator, the two corrections (ALE, and
. The
"MISCELLANEOUS" windows and "CONTROL MA
control keys can be defined in the
INT Level 4" windows.
MODAP Version
SIRIUS Version
9932 V2
45321648.01 108 B E
Checked
48 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e