User's Manual Part 2

ManualsBrandsThomson Broadcast & Multimedia ManualsElectronicsUHF Digital transmitter, for use with MediaFlo

Digital Liquid Cooled UHF

TV Equipment

Use of commands and description of indicators

Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.

2.1.2.5. "ETHERNET INSTALLATION PARAMETERS" window

This window appears when the changeover switch SW1 or S9 is switched so that the dot is visible and

It is called up by pressing the "INSTALL NEXT" control keys in "INSTALLATION EXCITER

PARAMETERS" window.

This window is used to change the Ethernet configuration parameters used by the communication

network. It is only available with TH860 CPU Board.

that CPU board is reset.

♦ For Digital Transmitter

It is called up by pressing the "INSTALL NEXT" control keys in "INSTALLATION ADAPTATION

PARAMETERS" window.

♦ For Analogue Transmitter

MESSAGE & CONTROL KEYS FUNCTIONS SELECTIONS AVAILABLE/COMMENTS

Displays the identification number of

the CPU board

This reference is single and associated to one

CPU board

Used to insert the WEB activation

code.

Displays the WEB activation code,

without option in operation the

control keys displays: “0”

THALES produces activation code of the

“Agent WEB” option. This code is single and

associated to the identification number of the

CPU board

Pressing this key calls up the "NUMERICAL

VALUE" window in which this code value can

be inserted.

Used to insert the SNMP activation

code.

Displays the SNMP activation code,

without option in operation the

control keys displays: “0”

THALES produces activation code of the

“Agent SNMP” option. This code is single and

associated to the identification number of the

CPU board

Pressing this key calls up the "NUMERICAL

VALUE" window in which this code value can

be inserted.

Used to Insert the IP address of the

transmitter in an Ethernet network.

Displays the IP address in operation.

When the Ethernet network is not

operated the control keys must

display: “0.0.0.0”

Your network administrator gives the IP

address.

NOTA : IP wrong address disturbs the

network.

Calls up the "NUMERICAL VALUE" window

9932 V2

45321648.01 108 B E

Checked

51 / 192

Numéro / Number Doc. Rev. Lan

27/06/2006