User's Manual Part 2

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
CONTROL KEYS FUNCTIONS DISPLAY/COMMENTS
Selects local or remote user interface. T he command is not available if the PCL is
locked. Selecting remote user interface locks
the following control keyss: CTRL, STDBY,
MODE, EXCITER
Only in Double Drive Version
hile the PCL is
cked (disabled).
Initiates shutdown or start-up of the reserve
exciter.
Command is disabled w
lo
Only in Analogue Transmitter
ing
mode (manual or automatic)
ommand is disabled while the PCL is
locked (disabled)
Selects the transmitter on-air/off-air switch C
Selects the transmitter-operating
(maintenance or normal).
mode ommand is disabled while the PCL is
cked (disabled).
C
lo
Validates a selection.
Cancels a sele ction.
Calls up the STATUS" "TRANSMITTER
window.
Calls up windows as follows:
"CONTROL MAINT Level 2", if the system is
in maintenance mode,
"CONTROL OPER Level 2", if the system is
in normal mode.
Calls up the "EXCITER Level 1" window.
Calls up the "AMPLIFIERS" window. (a)
Calls up the "INTLOCK" window. (a)
Calls up the "POWER SUPPLY" window. (a)
Calls up the "AFFINITY" window. (b)
(a): Not Visible for AFFINITY family
(b): Not Visible for OPTIMUM or ULTIMATE families
9932 V2
45321648.01 108 B E
Checked
70 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e