User's Manual Part 2

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
2.1.2.3. "CABINET CONFIGURATION PARAMETERS" window
This window appears wh SW1 on th
(MODAP) or on the manag rconnection card (S hed so that the dot is
visible and that CPU boar set.
It is called up by pressing the "INSTALL NEXT" control keys in the "TRANSMITTER INTERFACE
PARAMETERS" window.
This window is used to change the cabinet configuration paramete s sto
en the changeover switch e exciter/CPU interconnection card
IRIUS), is switcement system inte
d is re
r red in the CPU board.
CONTROL KEYS FUNCTIONS SELECTIONS
AVAILABLE/COMMENTS
the amplifier location in each of the cabinet
selected.
Validates the cabinet selection and detects
previous values
Cancels the entry and calls back the
Selects the number of currents measured by
amplifier unit (*).
Displays last selection
AMPLIS 6 TRANS. : 6 currents measured
AMPLIS 8 TRANS. : 8 currents measured
9932 V2
45321648.01 108 B E
Checked
45 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e