User's Manual Part 2

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
2.1.2.3.1. "LOCATION AMPLIFIER" window
and
U
is called
PARAMETER
This window e amplifier
cation store
This window appears when the changeover switch SW1 or S9 is switched so that the dot is visible
that CP board is reset.
It up by pressing the "DISPLAY " control keys in the " CABINET CONFIGURATION
S" window.
displays the location of RF amplifier in selected cabinet. It is used to change th
lo d in the CPU board.
CONTROL KEYS FUNCTIONS SELECTIONS
AVAILABLE/COMMENTS
Decrements the cabinet number (*). The ng from the
decrementation is displayed in the message
is
number resulti
window between the "+ CAB" and "- CAB"
control keys.
Command is disabled while the PCL
locked (disabled).
Increments the cabinet number (*).
ed in the message
window between the "+ CAB" and "- CAB"
control keys.
Command is disabled while the PCL is
locked (disabled).
The number resulting from the
incrementation is display
Detects the amplifier location in cabinet
selected.
Validates the entry
Cancels the entry and calls back the
previous windows
Calls up the "CABINET CONFIGURATION
PARAMETERS" window.
(*) : Operating only when there is more than one cabinet.
9932 V2
45321648.01 108 B E
Checked
47 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e