User's Manual Part 3

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
2.1.22. "FLO 1 PARAMETERS" window
This window is called up b
Level 2" window. It is only e mode.
It is used to change the Me in the CPU card.
y pressing the "MODUL PARAM." co
accessible in maintenanc
ntrol keys in the "CONTROL MAINT
diaFLO modulator card configuration parameters stored
CONTROL KEYS FUNCTIONS SELECTIONS
AVAILABLE/COMMENTS
Selects the transmitter ID number in an SF
network.
this key calls up the
N
This value allows addressing the content
of the MIP to this identified Tx.
Displays last selection.
Pressing
"NUMERICAL VALUE" window in which
this identification number can be
changed.
Selects the input signal type of th
modulator
e ASI / PRBS
Selects the clock type of the exciter. CLOCK Internal /
GPS Internal / GPS External
Selects the process PID number.
♦ WA PID : This value is programmed
Wid Area content process
identification (PID). If the wide area
PID value in the incoming transport
stream matches this value, the
stream is forwarded to the
channelizer as wide area content.
Otherwise, the stream is ignored.
♦ LA PID : This value is programmed
Local Area content process
identification (PID). If the local area
PID value in the incoming transport
stream matches this value, the
stream is forwarded to the
channelizer as local area content.
Otherwise, the stream is ignored.
Pressing this key calls up the
"NUMERICAL VALUE" window in which
this PID number can be changed.
9932 V2
45321648.01 108 B E
Checked
98 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e