User's Manual Part 3

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
MESSAGES FUNCTIONS DISPLAY/COMMENTS
Indicates the exciter changeover status in
automatic mode.
: the changeover system is
ready for an automatic switch over.
: the changeover system is no
longer available and it is necessary to
eir consequences; similarly
for all selections carried out on the PCL).
change the exciter selected or to carry out a
transmitter "RESET" (in this latter case, care
must be taken because fault data for all
faults which have disappeared will be erased
together with th
: an attempt to carry out an
automatic changeover has failed and the
buzzer will be triggered.
Indicates the external GPS changeover
status.
: the changeover system is
ready for an automatic switch over. The free
contact o . f the external GPS is closed
: the changeover system is no
longer available. The free contact of the
external GPS is openned.
: an attempt to carry out an
automatic changeover has failed. The free
contact of the external GPS is openned
In case of disable GPS signal the transmitter
is stopped after a delay time according to
"GPS MUTE (h) " control key in the
"MISCELLANEOUS" window.
Indicates the status of the very low voltage
power supply of the exciter. (2)
P. SUPPLY OK / P. SUPPLY FAULT (1)
(1) A fault-free status ackgroun
in case of colour tac en). A faulty status is displayed
background or on red background in case of colour tactile s
(2) Only Single Drive version.
is displayed in normal video (on black b
tile scre
d or on green background
in reverse video (on white
creen).
9932 V2
45321648.01 108 B E
Checked
110 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e