User's Manual Part 5

Digital Liquid Cooled UHF
TV Equipment
Use of commands and description of indicators
Information contained is this document is confidential, is THOMSON property and cannot be disclosed in whatever form without prior written authorization of THOMSON.
2.1.55. "VIEW TRANSMITTER INTERFACE INSTALLATION PARAMETERS" window
This window is called up by pressing on the "NEXT SCREEN" message window in the "GO HOME
AND VIEW INSTALLATION PARAMETERS" window.
CONTROL KEYS FUNCTIONS DISPLAY/COMMENTS
Calls up the "TRANSMITTER STATUS"
window.
Calls up the "VIEW CABINET
CONFIGURATION " window.
MESSAGE FUNCTIONS DISPLAY/COMMENTS
This message window indicates the transmitter
ID number in N+1 or Passive Reserve
configurations.
The transmitter ID number is used for
remote control through an RS 232/485
connection.
This message window indicates the type of
JBUS protocol operation for remote control
JBUS ASCII
JBUS RTU
This message window indicates the type of
remote operation.
SERIAL RMT CTRL, PARALLEL RMT
CTRL, USER RMT CTRL
This message window indicates the language of
the Local Control Panel windows.
FRANCAIS, ENGLISH, ESPAGNOL
This message window indicates the type of
power unity.
DISPLAY IN dB/W, DISPLAY IN %
This message window indicates if the CPU
software is adapted to suit the safety interface
hardware.
COOL REDUND NOT FITTED. ;
COOL REDUND FITTED
9932 V2
45321648.01 108 B E
Checked
173 / 192
Numéro / Number Doc. Rev. Lan
g
u.
27/06/2006
Pa
g
e