Instructions

2
G Operating instruction
Thank you for choosing aThomson product.
Take your time and read the following instructions and infor-
mation completely.Please keep these instructions in asafe
place for futurereference. If you sellthe device, please pass
these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a
dangerous voltage of sucient magnitude to constitute a
risk of electric shock.
Wa
rning
This symbol is used to indicate safety instructions or to draw
your attention to specichazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Overview
Receiver/headphones –Fig. 1
1. On/off switch
2. LED signal indicator (operation, Bluetooth status or
battery indicator)
3. Volume control (0 =lowest volume, 10 =maximum volume)
4. Balance control (R =right, L=left)
Receiver/headphones –Fig. 2
5. Button for Play /Pause /Accept call /Hang up
6. Button for Microphone /Bluetooth pairing
7. Integrated microphone
8. Headphone charging contacts
9. Left side of headphones (grey) with ball joint
10. Right side of headphones (red) with ball joint
Charging station/transmitter –Fig. 3
11. Transmitter charging contacts
12. LED signal indicator (operation/Bluetooth status)
Charging station/transmitter rear view –Fig. 4
13.
Power supply connection (mains adapter with 5.5 V/550 mA)
14. “Pair” button for pairing (charging station with headphones)
15. “Audio IN” connection for analogue audio connection
(3.5-mm stereo minijack/RCAconnectors)
16. Input selector switch for audio connection
3. Package contents
• Headset receiver with built-in lithium polymer rechargeable battery
• Transmitter and charging station
• Plug-in power supply
• Analogue audio adapter cable (red/white) –
• 2x RCAto3.5-mm stereo minijack
• Optical audio cable (Toslink/ODT) in black
• 2pairs of earpads
4. Safety Notes
Warning
• This product was designed specically for persons with
impaired hearing. Therefore, it is capable of producing
unusually high volumes.
• Beforeusing this product, persons with normal hearing
should turn the volume of the playback device down to
the lowest level!
• This device transmits signals at afrequency of 2,400 MHz.
Since this product may interferewith the operation of
pacemakers, persons with pacemakers should consult a
doctor beforepurchasing this product.
• High sound pressurelevel!
• Thereisarisk of hearing damage.
• To prevent hearing loss, avoid listening at high volume
levels for long periods.
• Using this product limits your perception of ambient noise.
Forthis reason, do not operate any vehicles or machines
while using this product.
• Always keep the volume at areasonable
level. Loud volumes, even over short
periods, can cause hearing loss.
• Protect the product from dirt, moistureand overheating, and
only use it in adry environment.
• Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
• Use the item only in moderate climatic conditions.
• Keep this product, as all electrical products, out of the reach
of children!
• Do not operate the product outside the power limits given in
the specications.
• Do not use the product in moist environments and avoid splashes.
• Do not place any containers lled with liquid, such as vases,
on top of the product or in its immediate vicinity.The con-
tainer may tip over and the liquid spilled may compromise
electrical safety.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• The battery is integrated and cannot be removed.
• Never open, damage or swallow batteries or allow them to
enter the environment. They can contain toxic, environmen-
tally unfriendly heavy metals.
• Do not tamper with or damage/heat/disassemble the batter-
ies/rechargeable batteries.
• Do not throw the battery or the product into re.
• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Children should be supervised to ensurethat they do not
play with the device.
• Do not use the product in areas wherethe use of electronic
devices is not permitted.
• Lay all cables so that they do not pose atripping hazard.