User's Manual

NOTE: If you choose “YES” all the settings in the programmable menu are

returned to factory default setting.

4. Press the MUTE/PROG button to save your selection. You will hear a

confirmation tone.

TELEPHONE OPERATION

CHARGE INDICATOR

When the IN USE/CHARGE indicator is lit, the handset is correctly seated in

the cradle and is charging.

MAKING CALLS

1. Pick up the handset, and press the TALK/END/CALLBACK button.

Listen for a dial tone.

2. Dial the number you want to call, or dial the number first then press the

TALK/END/CALLBACK button.

3. When finished, press the TALK/END/CALLBACK button to hang up.

ANSWERING CALLS

1. When the phone rings, pick up the handset, and press the TALK/END/

CALLBACK button.

2. When finished, press TALK/END/CALLBACK to hang up.

NOTE: Adjust the handset volume by pressing the CID/VOL (/\ or V) button

during a call.

CALL TIMER

After you press the TALK/END/CALLBACK button on the handset, the built-

in call timer shows on the display and counts the length of time of the call in

minutes and seconds.

PRE-DIALING

1. Make sure the phone is OFF (not in talk mode).

2. Enter the telephone number you want to call. The telephone number

shows in the handset display.