User's Manual

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before use.

CAUTION: To reduce the risk of ﬁre or personal

injury, use only the Thomson Inc. approved Nickel-

metal Hydride (Ni-MH) battery model 5-2734, that is

compatible with this unit.

1. Locate battery which is packaged inside a plastic bag and is

separate from the handset.

2. Locate the battery compartment on the back of the handset.

3. Plug the battery pack cord into the jack inside the

compartment.

NOTE: To ensure proper battery installation, the connector

is keyed and can be inserted only one way.

4. Insert the battery pack.

5. Close the battery compartment by placing the handset back

cover slightly higher than the handset and then sliding the

cover down into position.

PRESS DOWN FIRMLY

Battery Pack