User's Manual

NOTE: If the clock is not set, the date and time display will

blink. The blinking will stop when user updates the date/

time from the Handset menu, or the base receives a call

with CID having date and time stamp.

Programming Functions

The system uses a menu structure to give you access to all of the

built-in features. You may program the following items in main

menu: Intercom, Setup HS, Setup BS, Date/Time, Registration and

Answer system.

NOTE: If the handset is not registered, or is out of range,

Setup BS and Date/Time are not programmable, and

Unavailable displays as you try to enter these two menus.

NOTE: During programming, you may press the MUTE/

ringer on/off button at any time to exit the sub-menu

and return to the main menu, or press FLASH/exit to exit

programming and return to standby screen.

NOTE: If no key is pressed for 60 seconds, the handset will

automatically exit programming and return to standby

screen.

Handset Setup

1. Make sure your phone is OFF (not in talk mode).

2. Press the

MENU button to go to the main menu.

3. Press

CID/VOL (3or4) button to scroll to Setup HS.

4. Press

MENU button to conﬁrm and you may program the

following items: Ring Volume, Tones, Auto Talk, Handset Name

and Language.

Language

From the Setup HS Menu:

1. Press the

CID/VOL (3or4) button to scroll to the Language

sub-menu.