User's Manual

18
Press the CID/VOL (3or4) button to scroll to On or Off, then
press MENU button to save the setting. The default setting is
On.
No Coverage - You may set the warning beep to “On” or “Off”
when the handset is out of range. Press the CID/VOL (3or4)
button to scroll to On or Off, then press MENU button to save
the setting. The default setting is On.
NOTE: When the handset is in the idle (off) mode and is out
of range from the base unit the display shows Searching. If
the TALK/END button is pressed, the display briefly shows
Unavailable then returns to Searching.
Key Tone - You may set the key tone to “On” or “Off” when you
press buttons. Press the CID/VOL (3or4) button to scroll to On
or Off, then press MENU button to save the setting. The default
setting is On.
Auto Talk
This option allows you to pick up the handset from base to answer
an incoming call without pressing the TALK/END button.
From the Setup HS Menu:
1. Press the
CID/VOL (3or4) button to scroll to the Auto Talk
sub-menu.
2. Press
MENU button to enter the menu. Use the CID/VOL
(3or4) button to scroll to your selection. The default setting is
On.
3. Press the
MENU button to save your selection.
Handset Name
From the Setup HS Menu:
1. Press the
CID/VOL (3or4) button to scroll to the Handset
name sub-menu.