User's Manual

19
2. Press MENU button to enter the menu. The default setting is
Handset.
3. Use the touch-tone pad to enter a name (up to 13 characters).
More than one letter is stored in each of the number keys. For
example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times
for the letter L. Press the 5 key 3 times for the second letter
L, and press the 1 key to insert a space between the first and
last name. Press the 7 key 4 times for the letter S; press the 6
key once for the letter M; press the 4 key 3 times for the letter
I; press the 8 key for the letter T; press the 4 key twice for the
letter H.
NOTE: If you make a mistake, press CID/VOL ( 3or4 ) button
to move the cursor forward or backward, then use the
MUTE/ringer on/off button to backspace and delete one
character at a time.
NOTE: * key is a function key to toggle between the upper
case and low case of characters during text edit.
4. Press the MENU button to save your name. You will hear a
confirmation tone and the display shows Saved.
Base Station Setup
1. Make sure your phone is OFF (not in talk mode).
2. Press the
MENU button to go to the main menu.
3. Press
CID/VOL (3or4) button to scroll to Setup BS.
4. Press
MENU button to confirm and you may program the
following items: Area Code, Dial mode and BS Backlight.
Area Code
The telephone uses the pre-programmed area code to determine
the number format to display when a valid Caller ID record is