User's Manual

Making a Call

1. Press the TALK/END button. Dial the desired number.

- OR -

Dial the number ﬁrst, then press the TALK/END

button.

2. When ﬁnished, press the TALK/END

button or put the handset

back into the base cradle to hang up.

NOTE: If you want to delete the pre-dial number you

entered, press the MUTE/ringer on/off button until all of the

digits are erased.

Answering Calls

1. When the phone rings, press the TALK/END button.

- OR -

Press the SPEAKER

button on the base.

2. When ﬁnished, press the TALK/END

button on handset or the

SPEAKER

button on base, or put the handset back into the base

cradle to hang up.

NOTE: If you have turned the Auto Talk function on, you can

pick up the handset from the base to answer the incoming

call directly, without pressing any buttons.

NOTE: Adjust the handset volume by pressing the

CID/VOL

(3or4)

button during a call.

NOTE: If you press the SPEAKER button to answer a call

while the handset is not in the base cradle, the call will not

be ended even when you place the handset back into the

base cradle during the conversation.

Inserting a Pause in the Dialing Sequence

Press the #PAUSE button twice to insert a delay in dialing

sequence when a pause is needed to wait for a dial tone (for