User's Manual

1. Make sure the phone is OFF (not in talk mode).

2. Press the

CID/VOL (4) button to review the oldest call and

scroll toward the most recent calls.

3. Press the

CID/VOL (3) button to review the newest call and

scroll toward the older calls.

NOTE: When you reach the end of records, --End of list-- shows

in the display.

NOTE: If no calls have been received, Empty shows in the

display for 2 seconds at the time the CID/VOL (3or4) button

is pressed.

Dialing a CID Number

1. Make sure the phone is OFF (not in TALK mode).

2. Use the

CID/VOL (3or4) button to display the desired record.

3. Press the TALK/END

button. The number dials automatically.

Formatting a CID Number Before Dialing

NOTE: Depending on (a) how the incoming caller’s phone

number is formatted when it is received, and (b) whether or

not you previously pre-programmed your local area code

into the set up menu, you may need to adjust the format of

the incoming caller’s stored phone number before making

the call, press the FORMAT button to adjust the number,

and try again.

1. Make sure the phone is OFF (not in talk mode).

2. Use the

CID/VOL (3or4) button to scroll to the desired CID

record.

3. Press the

FORMAT button to scroll to the desired format.

4. Press the TALK/END

button. The formatted number dials

automatically.