User's Manual

42
Leaving a Memo
This feature lets you record a memo up to 3 minutes long to store
as an incoming message.
1. Press and hold the
MEMO button
2. Begin speaking after it announces “
Record message”.
3. Release the
MEMO button when finished.
Changing the Battery
CAUTION: To reduce the risk of fire or personal
injury, use only the Thomson Inc. approved Nickel-
metal Hydride (Ni-MH) battery model 5-2734, that is
compatible with this unit.
1. Make sure the telephone is OFF (not in TALK mode) before you
replace battery.
2. Remove the battery compartment door.
3. Disconnect the battery plug from the jack inside the battery
compartment and remove the battery pack from the handset.
4. Insert the new battery pack and connect the cord to the jack
inside the battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge.
Allow the handset battery to properly charge (for 14 hours)
prior to first use or when you install a new battery pack. If
you do not properly charge the phone, battery performance
will be compromised.