User's Manual

• Make sure base is not plugged into an electrical outlet with

another household appliance. If necessary, relocate the

base.

• Charge the battery (for 14 hours).

Memory dialing doesn’t work

• Did you follow proper dialing sequence?

Unit locks up and no communication between the base and

cordless handset

• Unplug the power adaptor from the electrical outlet and the

bottom of the base. Remove the handset battery. Wait for 30

seconds and plug the power adaptor back into the base and

electrical outlet. Reconnect the battery and charge for 14

hours.

Searching.... shows in the handset display

• Move the handset closer to the base.

• Make sure the base power cord is connected to a working

electrical outlet.

Date/Time setting is restored to default setting

• May be caused by power failure. Set Date/Time again.

Caller ID Solutions

No Display

• Charge the battery (for 14 hours). Or replace the battery.

• Make sure the unit is connected to a non-switched electrical

outlet. Disconnect the power adaptor from the base and

reconnect it.

No Caller ID

• You must be subscribed to the standard Name/Number

Caller ID service from your local telephone company to

receive CID information.