User's Manual

21
3. Press MENU button to enter the menu. Year 2007 shows in the
display.
4. Use the touch-tone pad to enter the last two digits of the
current year (range: 00 to 99).
5. Press
MENU button to save the year setting and proceed to
date setting.
6.
Date 01/01 shows in the display. Use the touch-tone pad to
enter two digits for current month and day respectively.
7. Press
MENU button to save the month/date setting and
proceed to time setting.
8.
Time 12:01p shows in the display. Use the touch-tone pad to
enter four digits for current time and use CID/VOL (3or4)
button to toggle between “p” (pm) and “a” (am).
9. Press
MENU button to save the setting. Saved shows in the
display.
NOTE: If you subscribe to Caller ID service, the current
date/time is set automatically when you receive your first
CID record and will override manually set date/time.
Registration
NOTE: The following procedures can ONLY be done with
27950/1 or 279XX Accessory Handsets.
A cordless handset will not operate until it is registered to the base.
During the registration process, keep the handset near the base.
Up to 4 cordless handsets can be registered to one base.
NOTE: If a handset is not registered; Not Register flashes
on the display and if the TALK button on the handset is
pressed, it will display Unavailable.
1. Make sure your phone is OFF (not in talk mode).
2. Press the
MENU button to go to the main menu and use CID/
VOL (3or4) button to scroll to Registration.