User's Manual

15
Reviewing and Choosing the Announcement
Press and release the ANNOUNCE button to review your outgoing announcement.
Audible Quick Setup Guide
If you need additional assistance; while in standby mode, press the REPEAT button on
the base and follow the voice instructions.
Programming the Telephone
The base and handset menu gives you access to all of the built-in features. Press the
Menu (SK) button to display the first menu Answerer, and press 6 and 5 buttons to
navigate to the desired menu option. Press the Select (SK) button to activate a menu
option. For details on programming, refer to the applicable section.
During programming, you may press the Back (SK) button at any time to exit the
menu and keep the previous setting.
Answerer
There are five programmable menus available: Answerer On/Off, Security Code,
Message Alert, Rings to Answer and Message Length.
1. Make sure your phone is
OFF (not in talk mode).
2. Press the Menu (SK) button and
Answerer shows on the display.
3. Press the Select (SK) button to enter the menu.
Answerer On/Off
This menu allows you to set the answering system on or off.
From the ANSWERER menu:
1. Use the 6 or 5 button to scroll to ANSWERER ON/OFF.
2. Press the Select (SK) button to enter the menu.
3. Use the
6 or 5 button to select ON or OFF. The default setting is ON.
4. Press the Select (SK) button to save your selection. You will hear a confirmation tone.