User's Manual

4. The answerer will announce “ALL OLD MESSAGES ERASED MAILBOX X“.

To erase a message using the handset

1. Press the Menu (SK) button on the handset

2. Press the

6 or 5 button to select ANSWERER and press Select (SK) button to

enter the menu.

3. Press the

6 or 5 button again to select HANDSET ACCESS and press Select (SK)

button to conﬁrm.

4. Press the key 2 (play/stop) followed by the mailbox number on the handset (e.g.

Press key 2 and then key 3 to play messages in mailbox 3.)

5. Press the key 0 (erase) on the handset to erase a message during playback.

NOTE: Erased messages cannot be restored.

Leaving a Memo

This feature lets you record a memo up to 3 minutes long to store as an incoming

message.

1. Press the MEMO button and it will announce

“PRESS AND HOLD MAILBOX”.

2. Press and hold the mailbox button (

PLAY STOP 1/ PLAY STOP 2/ PLAY STOP 3). You

must hold the button until you ﬁnish recording the memo.

3. Begin speaking after it announces

“RECORD MESSAGE”.

4. Release the mailbox button when ﬁnished.

Answering System Remote Access

You may access the answering system with the cordless handset or from any tone-

dial compatible telephone.

Remote Access from Cordless Handset

Use the corresponding handset keys just like you would use the base buttons (see

“Answering System Setup”).The button functions are located on the handset above

each number key. For example, to play messages:

1. Press the Menu (SK) button and use

6 or 5 button to scroll to ANSWERER.

2. Press the Select (SK) button and use

6 or 5 button to select HANDSET ACCESS.

3. Press the Select (SK) button again,

HANDSET REMOTE shows on the display.