User's Manual

Mute

To have a private, off-line conversation, use the mute feature. The party on the other

end of the line cannot hear you, but you can still hear them.

When you are using the phone, press the MUTE button on handset to activate the

mute function. To de-activate, press the MUTE button on handset again.

Ringer Volume (Shortcut)

There are two ways to set the ringer volume. One is via the handset menu as

described in the section Programming the Telephone-->Sound Setting-->Ringer

Volume, while the other one is this shortcut.

1. Make sure the phone is

OFF (not in talk mode).

2. Press the #PAUSE/RINGER button to enter the

RING VOLUME menu.

3. Use the

6 or 5 button to scroll to the desired ringer volume. The default is

VOLUME 5.

4. Press the Select (SK) button or #PAUSE/RINGER button again to save your selection.

You will hear a conﬁrmation tone.

Do Not Disturb (DND)

This feature allows you to turn off all the handset ringer(s) at once, by pressing one

button at the base unit, even though the ringer volume of handset(s) has been set to

HIGH or LOW.

1. In the standby mode, press the DO NOT DISTURB button on the base.

2. The DND indicator will light and

DO NOT DISTURB shows in each handset display.

3. To cancel, press the DO NOT DISTURB button again.

NOTE: You can press the DO NOT DISTURB button and activate the

function immediately, even when there is incoming call ringing in,

or during call screening after the call is taken by the answerer.