User's Manual

42
Room Monitor
(This is only applicable when 2 or more handsets are registered to the same base unit.
IMPORTANT NOTE: The following procedures can ONLY be done with
Model 28101 and 28103 handsets.
1. Make sure your handset and the handset to be monitored are NOT in talk mode.
2. Press the Menu (SK) button and use the
6 or 5 button to scroll to EXTRAS.
3. Use the
6 or 5 button to scroll to ROOM MONITOR.
4. Press the Select (SK) button and all the registered handset names and numbers
show on the display.
5. Use the
6 or 5 button to select the desired handset. Press the Select (SK) button
to confirm.
NOTE:
1) If handsets have been named, then the name will be displayed on
the LCD instead of handset numbers.
2) During the room monitoring, it will emit a beep tone if there are
incoming calls. You may press the TALK or SPKR button to answer
the call and quit the room monitor mode.
3) While in room monitoring mode, the initiating handset can listen
with the handset speakerphone by pressing the SPKR button once.
Switch back to the earpiece by pressing TALK button once. Press
the Back (SK) button to end room monitoring.
Intercom Operation
The intercom feature allows you to have a conversation with another registered
handset without tying up the telephone line, allowing you to still receive incoming
calls.
IMPORTANT NOTE: The following procedures can ONLY be done with
Model 28101 and 28103 handsets.
Handset to Handset Intercom Call
1. Make sure the originating phone is OFF (not in talk mode).
2. Press the Menu (SK) button and use the
6 or 5 button to scroll to EXTRAS.