User's Manual

Inserting a Pause in the Dialing Sequence

Press the #PAUSE button on the touch-tone pad twice to insert a delay in the dialing

sequence of a stored telephone number when a pause is needed to wait for a dial tone (for

example, after you dial 9 for an outside line, or wait for a computer access tone.) A pause

shows on the display as a P. Each pause counts as 1 digit in the dialing sequence. If you need

a longer pause, press the #PAUSE button twice again.

Reviewing a Stored Number

1. Make sure the phone is OFF (not in TALK mode).

2. Press the MEMORY Soft Key Left (SKL) to enter the main menu.

3. Use the

button to scroll to desired record.

-OR-

Press the 2-9 key to search for the desired record alphabetically. For example, if the

record names starts with the letter "N", pressing the 6 key will automatically skip to the

records starting with the letter "M". The 6 button can then be pressed multiple times

until the records starting with the letter "N" are displayed. You can then use the

button to scroll to desired record.

4. Press the VIEW Soft Key Right (SKR) to review the detail information of the record.

NOTE: The handset can access the base memory as well as the handset

memory. To access the base memory from the handset, press the

MEMORY Soft Key Left (SKL) and then press the BASE Soft Key Right

(SKR).

Changing a Stored Number

1. Make sure the phone is OFF (not in TALK mode).

2. Press the MEMORY Soft Key Left (SKL) to enter the phone book.

3. Use the

button to scroll to desired record.

4. Press the OPTION Soft Key Left (SKL) to access the option menu.

5. Use the

button to scroll to EDIT.

6. Press the SELECT Soft Key Left (SKL) to conﬁrm.

7. Repeat Steps 6 through 10 in Storing CID Records in Internal Memory.