User Manual

1

This section shows you how to set up your answering system to receive incoming calls.
Before you begin the set up process, you must turn on the answering system.
1. Answering system has  modes
RECORDS MSGS MODE, ANNOUNCE ONLY MODE
and OFF.
. Press the answer mode button to switch to
RECORDS MSGS MODE, ANNOUNCE
MODE and OFF.



In the Answerer Menu, there are four programmable submenus: Answerer mode,
Rings to Answer, Message Alert and Security Code.
1. Make sure your phone is
 (not in  mode).
. Press the
 button to go to the main menu.
. Press
 (5 or 6) button to scroll to .
. Press
 button to enter the submenu.


1. Press the  (5 or 6) button to scroll to the answerer mode
sub-menu.
. Press
 button to enter the menu. RECORD MSGS shows in the
display.
. Use the
 (5 or 6) button to scroll to your selection. The default
setting is RECORD MSGS.
. Press the
 button to conrm. You will hear a conrmation tone and
the new setting shows in the display.