User Manual

16

You can access the answering system from a tone dialing telephone in another
(remote) location. The security code is required for remote access, and it prevents
unauthorized access to your answering system.

1. Press the  (5 or 6) button to scroll to the 
sub-menu.
. Press
 button to enter the menu. SECURITY CODE 1 2 3 shows in
the display.
. Use the touch-tone pad to enter your new -digit security code. The default setting
is 123.
. Press the
 button to conrm. You will hear a conrmation tone and
the new security code shows in the display.



Use the  (5 or 6) buttons to adjust speaker volume on the base to a
comfortable level. L1 is the minimum speaker volume and L8 is the maximum.

If you need additional assistance, press the  button in standby mode and follow
the voice instructions.

For best results when recording, you should be about nine inches from the microphone,
and eliminate as much background noise as possible.
You may record an outgoing announcement for the current answerer mode or choose
the default for your current outgoing announcement.
1. Make sure the answering system is
.
. Press and hold the
 button until the speaker announces “RECORD
ANNOUNCEMENT FOR RECORD MESSAGES MODE AFTER THE TONE “.
. Begin speaking after you hear the beep.