User Manual
1
. Press the button to save your selection. You will hear a
conrmation tone and the selected language shows in the display.
When this function is , during an external call, you may lift the handset to answer a
call immediately without pressing any buttons. To end a call, put the handset back on
the base cradle directly.
1. Press the (5 or 6) button to scroll to the sub-menu.
. Press
button to enter the menu. > NO YES shows in the display.
.
Use the (5 or 6) button to scroll to your selection. NO is the
default setting.
. Press the button to conrm.
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
1. Press the (5 or 6) button to scroll to the
sub-menu.
. Press the
button to enter the menu. YES4NO shows in the display
The default setting is NO.
. Use the
(5 or 6) button to scroll to or .
. If you select
, press the button. HOLD BASE FIND FOR 5
SECONDS, THEN PRESS MENU OK KEY shows in the display. (Your handset should
be held near the base during registration process.)
5. Press and hold the
button on the base unit, the charge/in use indicator
ashes. Press the handset button. REGISTERING shows in the
display. REGISTERED shows in the handset’s display. You may now rename your
handset. (Refer to Step & of Handset Name Section)