User Manual



If one or more handsets become lost, you should de-register all handsets to ensure
proper system operation.




1. Disconnect power from the base by pulling the plug out of the back of the unit.
. Press and hold the
 button and while holding the  button reconnect the
power.
. Continue to hold the
 button until the charge/in use light ashes rapidly.
. Release the
 button.
5. Press and release the
 button on the base once. All handsets are
de-registered and HANDSET NEEDS REGISTRATION shows in the display.

1. Make sure your phone is  (not in talk mode)
. Press the
 button to go to the main menu.
. Use the
 (5 or 6) button to scroll to .
. Press
 button to enter the menu, ON > OFF shows in the display.
5. Use the
 (5 or 6) button to select ON or OFF. Press 
 button to conrm.
6. If ON is selected, then
SET ALARM TIME shows in the display. Use the number
keys to enter the alarm time (for example, 0:10PM) key in 010. Use the 
 (5 or 6) button to select AM or PM.
7. Press
 button to display >ONCE OR DAILY and select ONCE or
DAILY.
8. Press the
 button to save selection. You will hear a conrmation
tone and return to main menu.