User Manual
6
As you become familiar with this system, you may prefer to use the system’s original
settings. Follow the steps below to return to the factory default settings.
1. Press the (5 or 6) button to scroll to the
sub-menu.
. Press the
button to enter the menu. YES4NO shows in the
display. The default setting is NO.
. Use the
(5 or 6) button to move the cursor to or .
. Press the button to save your selection. You will hear a
conrmation tone.
The charge/in use indicator on the base will ash to alert you to an incoming call,
during paging, or if you have a message waiting from your service provider. The
indicator will remain lit when a handset is in the base charging or when the line is in
use.
The indicator buttons ash when you receive a call and remain lit
during a call.
The keypad and CID will also light when a call is received.
The VMWI indicator on the top of the handset ashes when you receive a new
message from your service provider. Also, it serves as a Visual Ringer function. It will
ash when there is an incoming call.