User Manual

0

When the handset is  (in TALK mode) you may adjust the receiver volume by
pressing the  ( 5or6 ) button. There are ve volume levels to choose
from. When the maximum or minimum volume level is reached, the phone beeps twice.
VOL 1 is minimum and VOL 5 is maximum.

This feature allows you to turn off all the handset ringer(s) at once, by pressing one
button at the base unit, even though the ringer volume of handset(s) has been preset.
1. In the standby mode, press the
 button on the base.
. The DND indicator will light and
shows in each handset display.
. To cancel, press the
 button again.



 

The intercom feature allows you to have a conversation with another registered
handset without tying up the telephone line, allowing you to still receive incoming calls.

1. Make sure the handset is  (not in TALK mode).
. Press the
 button on the handset.
. Use the touch-tone pad to select the handset you want to page.






