User Manual

1



. A long beep is heard and then the two handsets are immediately connected.
Receiving handset shall immediately come into the auto intercom mode that both
“microphone” and “speaker” of this receiving handset shall be enabled such that
the user of receiving handset can freely talk and listen to the conversation.
5. When nished, press the
 button or  button on either handset
to deactivate the intercom.







If you receive a telephone call during an intercom call, an incoming call alert tone will
be heard (through the earpiece or speaker). If the user wants to answer an incoming
call, they must press  to terminate the intercom and receive an incoming ring.

During a telephone call, you may use the intercom/paging function to page another
handset and have an off line, private (two-way) intercom conversation. You may also
have a three-way conversation between the external caller and the handsets, or you
may transfer the external telephone call to another handset.




1. During an external call, press the  button, and use the touch-tone
pad to enter the handset number to put an external line on hold. The user may
then auto intercom with the paged handset.