User Manual




. When nished, press the button to end the intercom call, return to the talk
mode, and resume your original telephone conversation.

1. During an external call, press the  button. LINE ON HOLD
EXTENSION? shows in the display.
. Use the touch-tone pad to select Handset # to enter into auto intercom call with
paged handset.
. When the receiving handset connects, press the
 button on the
originating handset to conference with the receiving handset and the external
caller. CONFERENCE shows in the display on the originating and receiving
handsets.




During an external call, you may transfer the external call to another handset.
1. Press the
 button on the originating handset to put an external call
on hold, and enter the paged handset number.
. A long beep is heard and then the two handsets are immediately connected.
Receiving handset shall immediately come into the auto intercom mode that both
“microphone” and “speaker” of this receiving handset shall be enabled such that
the user of receiving handset can freely talk and listen to the conversation.
. When the receiving handset connects, press the
 button on the originating
handset to transfer the call.