User Manual

When answering system memory is full, the system answers after 15th ring, and beeps
to prompt you to enter the -digit security code. If you don’t enter the security code
within 8 seconds, the phone hangs up.
You should erase some messages so the answering system can record new messages.
1. Make sure the telephone is (not in TALK mode) before you replace battery.
. Remove the battery compartment door.
. Disconnect the cord attached to the battery pack and remove the battery pack
from the handset.
. Insert the new battery pack and connect the cord to the jack inside the battery
compartment.
5. Put the battery compartment door back on.
6. Place handset in the base to charge.
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,
toxic materials could be released which can cause injury.
• To reduce the risk of re or personal injury, use only the
battery listed in the User’s Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 0 days.










