User Manual

5. Use the touch tone pad to enter the handset name/number to be monitored.

NOTE: When this phone system is expanded (up to 6 handsets by

purchase of optional Model 28203 handset with recharge cradle),

handsets are named HANDSET 1, HANDSET 2, HANDSET 3 and so

on respectively.

6. The receiving handset will turn on the microphone and the originating handset will

turn on the speakerphone to monitor sound from the receiving handset.

NOTE: For room monitoring mode to work, the originating handset

must NOT be on the cradle.

NOTE: While in room monitoring mode, the handsets will emit an

alert tone approximately every 5 seconds if there is an incoming

call. You may press the TALK/SPEAKER button to quit room monitor

and answer the call.

NOTE: While in room monitoring mode, the originating handset can

be switched to monitor by handset earpiece by pressing the

TALK/SPEAKER button once. Switch back to speakerphone by

pressing the TALK/SPEAKER button once.

NOTE: Press the END button on the handset to exit room monitor mode.

Initial Setup

1. Make sure your phone is OFF (not in TALK mode).

2. Press the mute/menu OK button to go to the main menu.

3. Press caller ID-volume (6 or 5) button to scroll to INITIAL SETUP.

4. Press the mute/menu OK button to enter INITIAL SETUP menu.