User Manual

16
Date and Time
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the DATE and TIME
sub-menu.
2. Press mute/menu OK button to enter the menu. Use the number keys to enter the
current date, (for example, 31 December, 2007) key in 071231.
3. Press mute/menu OK button to confirm your selection and advance SET TIME
sub-menu.
4. Use the number keys to enter the current hour and minute, then use the
caller ID-volume (5 or 6) to select AM or PM.
5. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the current time shows in the display.
Area Code
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the AREA CODE sub-menu.
2. Press mute/menu OK button to enter the menu. SET AREA CODE - - - shows in the
display.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press the mute/menu OK button to confirm. You will hear a confirmation tone and
the new area code shows in the display.
NOTE: To restore the default setting to - - -, press and release
delete/int/conf when SET AREA CODE shows in the display.
Tone/Pulse
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the TONE/PULSE
sub-menu.
2. Press mute/menu OK button to enter the menu. 4TONE PULSE shows in the
display. The default setting is TONE.
3. Use the caller ID-volume (5 or 6) to select TONE or PULSE.
4. Press the mute/menu OK button to confirm. You will hear a confirmation tone and
your selection shows in the display.