User Manual

17
Language
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the LANGUAGE
sub-menu.
2. Press mute/menu OK button to enter the menu. 4ENGLISH ESPANOL shows in
the display.
3. Use the caller ID-volume (5 or 6) button to scroll to the desired language.
ENGLISH is the default setting.
4. Press the mute/menu OK button to save your selection. You will hear a
confirmation tone and the selected language shows in the display.
Auto Talk
When this function is ON, during an external call, you may lift the handset to answer a
call immediately without pressing any buttons. To end a call, put the handset back on
the base cradle directly.
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the AUTO TALK sub-menu.
2. Press mute/menu OK button to enter the menu. > NO YES shows in the display.
3. Use the caller ID-volume (5 or 6) button to scroll to your selection. NO is the
default setting.
4. Press the mute/menu OK button to confirm.
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the REGISTRATION
sub-menu.
2. Press the mute/menu OK button to enter the menu. YES4NO shows in the display
The default setting is NO.
3. Use the caller ID-volume (5 or 6) button to scroll to YES or NO.
4. If you select YES, press the mute/menu OK button. HOLD BASE FIND FOR 5
SECONDS, THEN PRESS MENU OK KEY shows in the display. (Your handset should
be held near the base during registration process.)