User Manual

18
5. Press and hold the find button on the base unit, the charge/in use indicator
flashes. Press the handset mute/menu OK button. REGISTERING shows in the
display. REGISTERED shows in the handset’s display. You may now rename your
handset. (Refer to Step & of Handset Name Section)
NOTE: If you are re-registering the handset through the handset
menu; to rename your handset you must go to the Handset Name
Section and start from the beginning step.
De-Registration
De-registration cancels registration. During the de-registration process, keep the
handset near the base.
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the DEREGISTRATION
sub-menu.
2. Press the mute/menu OK button to enter the menu. YES4NO shows in the
display, the default setting is NO.
3. Use the caller ID-volume (5 or 6) button to scroll to YES or NO.
WARNING: It is not recommended that a handset be
de-registered unless absolutely necessary because once a
handset is de-registered, that handset’s telephone features
cannot be used until the handset is re-registered.
4. Select NO, if you do not want to de-register.
5. If you select YES, press the mute/menu OK button and MOVE NEAR BASE displays
for seconds, then YES NO appears in the display.
6. Use the caller ID-volume (5 or 6) button to scroll to YES or NO.
7. If you select YES, press the mute/menu OK button to confirm. DE-REGISTER...
shows in the display. You will hear a confirmation tone. Then DEREGISTERED
shows in the display to confirm the handset is deregistered.
NOTE: When you complete the de-registration process, HANDSET
NEEDS REGISTRATION shows in the display. To use the handset,
you MUST re-register the handset using the Registration process.