User's Manual

– 15 –
Area Code
 Press key.
 Press ▲ or ▼ key to select “Area Code” and press key.
 ENTER the area code.
 Press
key to confirm the setting.
 Press the exit key to return to idle mode.
LCD Contrast
There are 8 levels selection. The default setting is level 4.
 Press
key.
 Press ▲ or ▼ key to select “CONTRAST” and press
key.
 Press ▲ or ▼ key to select the desired contrast level.
 Press
key to confirm the setting.
 Press the exit key to return to idle mode.
Key Tone
You can set the Base key tone to “On” or “Off” when you press the
base keypad. The default setting is “On”.
 Press
key.
 Press ▲ or ▼ key to select “KEY TONE” and press
key.

Press
▲
or
▼
key to select “ON” or “OFF”.
 Press
key to confirm the setting.
 Press the exit key to return to idle mode.
Dial Mode
You can set the dial mode to “Tone” or “Pulse”. The default setting is
“Tone”.
 Press
key.
 Press ▲ or ▼ key to select “DIAL MODE” and press
key.
 Press ▲ or ▼ key to select “TONE” or “PULSE”.
 Press
key to confirm the setting.
 Press the exit key to return to idle mode.
Date / Time
You can set the Date/Time displayed in idle mode. The default setting
is “2007, 01/01 12:01 pm”.
 Press
key.
 Press ▲ or ▼ key to select “DATE/TIME” and press
key,
the LCD will display “Year 2007”.
 Input the correct last two digits of year (range: 00-99) using