User's Manual

– 8 –
Insert one AAA battery pack in the compartment, ensuring correct
polarity and close the compartment
.
Place the handset in the remote charge unit to charge for 14 hours
prior for first use. If you don’t properly charge the phone, battery
performance will be compromised.
If batteries are empty, handset LCD will not has any display and the
handset will not response to any key. Handset is then required to put
back on Base Station / Charger cradle to charge. Handset cannot be
used until handset name and aerial icon appear. If handset does not
charged full before use, handset may emit battery low alert tone and
battery level indicator shows empty.
Corded Base Station Set Up
Ringer Switch Setting
Ringer volume level (HIGH/LOW/OFF) can be selected by a
switch at the rear side of base station. Default is HI.
Note: Base intercom ring tone level can’ t be turn OFF. Handset ringer
volume setting is refer to section of Headset Settings – Ring Volume.
Warning: The handset does not work and damaged if the wrong
batteries are inserted.
Use Only Rechargeable batteries supplied (charge at least 14 hours
before use).
Do Not use Alkaline or Non Rechargeable batteries.