Operation Manual

EN 10
English
Use more of your TV
Design and specications are subject to change without notice.
or signal source change.
- The set can not play les normally if the
parameters of the le exceed the limitations of
the system, the le format is not supported, the
le is damaged , or the le can not be decoded
- Do not unplug the USB memory device when
the system is reading a le or transmitting data,
otherwise the system or the device may be
damaged.
Schedule list
This function is used to perform scheduled recording.
1. Press Option on the remote control and select
Quick access > Schedule list.
2. Press OK/► to display the schedule list.
3. To add a schedule into your schedule list, press
the red button rst to display Schedule list. Then,
- Channel number: use ◄/► to select the
channel number.
- Start date: use the digit buttons to set the
recording date.
- Start time: set the starting time of recording.
- Stop time: set the stopping time of recording.
- Schedule type:
• set Reminder to inform you that you can switch
to the scheduled programme when the time you
set comes. When time out and you don’t execute
any operation, the dialog box will disappear and
no further operation will be executed.
• set Record to check if you really want to start
your scheduled recording when the time you set
comes. When time out and you don’t execute
any operation, scheduled recording will start
automatically.
- Repeat type: set different repeat mode of
recording.
4. Press ▲/▼/◄/ ► to select Add, then press OK to
add the schedule you set into your schedule list.
5. Press the red button to repeat above procedures
to add another schedule.
6. If you wish to edit or delete a schedule, select it
and press OK to enter.
7. Press Exit to close the menu.
Notes for password in Parental Control Lock function:
- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.