Operation Manual

EN
4
LAN VGA

HDMI 2HDMI 3 (ARC)

Connections
Chapter 1
Connect the power and antenna
To switch on TV after connecting power cord, press or
POWER/
.
Note: Position of power socket varies according to TV model. On certain models, you have to turn on the power
switch rst.
Cable
Notes:
-
Disconnect the power cord before connecting devices.
-
Position of TV ports varies according to TV model.
DVD player, home theatre system, PC
Notes:
-
Before connecting a PC, set the PC monitor refresh rate to 60Hz.
-
It is recommended to use as short as possible high quality HDMI cables to avoid possible interferences.
-
It is recommended to use 1m long or shorter VGA cable with ferrite beads in case VGA input is available
in TV and TV is connected using VGA cable. Maximum supported VGA resolution is 1024x768/60Hz.
Network
connection
Or use an HDMI
connection.
DVD player/
Home theater system