Operation Manual

Chapter 1: Connections and Setup

Reset Button behavior

a) Push and hold the button between 0 and 5 seconds Æ Reboot the device

b) Between 6 and 10 seconds Æ Display the channel bonding status for DS and US

Note: This is the same as the above Channel Bonding display after the registration

c) After 11 seconds Æ Perform the factory reset (This operation should only be performed upon your

Cable-Operator’s request)

Rear Panel

TCM470

DCM475

z GIGA ETHERNET: Ethernet 10/100/1000BaseT RJ-45 connector

z RESET: Reset CM

z CABLE: F-Connector

z 12VDC: AC power socket

z on/off button: Power on/off switch ( TCM470 only )

Downloaded from www.Manualslib.com manuals search engine